ballast with parameter adjustment and remote control for 4-pin UV-lamps, lamp power up to 1200W
lamp power: up to 1200 W
lamp current: up to 10,0 A
Features
- preheat start ballasts for optimal lamp operation with adjustable operation parameters
- single device - powers one lamp
- adjustable preheat and operation parameters settings for use in different environmental conditions
- controllable via PLC or ZED ZCON control units, allows dimming, using remote mode the status relay wiring can be omitted
- lamp and ballast status indication
- green, red and yellow LEDs
- ModBus/ZCON status request
- optional: potential free relay contacts - up to 30 m lamp cable length possible
- local operation and digital remote control
- lamp operation control via RS485 using ModBus or ZCON protocol, optional:
- ethernet interface
- dimming using analog 4...20mA/0...10V interface - metal housing, designed for optimal thermal flow
- enhanced protection
- power range control
- undervoltage protection
- overtemperature protection - high efficiency
- active power factor correction (PFC)
low THD according to EN 61000
Technical Specification
| supply voltage: | 230 V AC ± 10% / 45-65 Hz (115 V AC types on request) |
|---|---|
| efficiency: | > 90% |
| operation temperature: | max. 50 ° C (122 ° F) at TC-point (ballasts are overtemerature protected) |
| ambient temperature: | 0 - 40 ° C (32-104 ° F) |
| IP code: | IP20 |
| dimensions (LxWxD): | 269 x 317 x 83 mm (10,57 x 12,46 x 3,27 inch) |
UV lamp types
- GPHHA1554T10L
- NNI 600/147 XL
- NNI 800/147 XL
- NNI 1000/180 XL
- TUV 800W XPT
(ballasts for other UV lamp types available on request)
ZED Control Units
- ZCONmini
- ZCONdin
- ZCONnano